Quantity Each
£3.75
Please select one of the buttons below.
20 x 1 Amp Diodes For PCU Point Control Unit & SS-1 (GM74)
Quantity Each
£15.49 £17.45 approx 10% off
Please select one of the buttons below.
Capacitor Discharge Unit (GMC-CDU)
< Click here for more details >
< Click here for less details >
For operating heavy duty point motors. The unit stores up power in capacitors and when a point motor is actuated, discharges in one big punch giving the point motor a firm and positive switching action. Connected to points via switches or probe and studs. Prevents burnt out motors.
Input:
16v to 24v A.C. at a maximum of 2.5 amps Gaugemaster T1 for Hornby/ Peco/ Seep point motors or T3 for 24v applications.
Quantity Each
£7.50
Please select one of the buttons below.
1 x Seep Point Motor With Switch (GMC-PM1)
< Click here for more details >
< Click here for less details >
Seep Point Motors have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-1 is our best selling point motor and has a built in changeover switch to operate accessories or change frog polarity. Drive rod 41mm long
Quantity Each
£31.99 £37.50 approx 15% off
Please select one of the buttons below.
5 x Seep Point Motors With Switch (GMC-PM1)
< Click here for more details >
< Click here for less details >
Seep Point Motors have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-1 is our best selling point motor and has a built in changeover switch to operate accessories or change frog polarity. Drive rod 41mm long.
Quantity Each
£5.25
Please select one of the buttons below.
1 x Seep Point Motor (GMC-PM2)
Quantity Each
£22.49 £26.25 approx 15% off
Please select one of the buttons below.
5 x Seep Point Motors (GMC-PM2)
Quantity Each
£8.75
Please select one of the buttons below.
1 x Seep Point Motor With Switch "Self Latching" (GMC-PM4)
< Click here for more details >
< Click here for less details >
Seep Point Motors have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-4 is a self-latching point motor, ideal for use with hand-made points, and also includes a changeover switch for operating accessories or changing frog polarity. Drive rod 41mm long.
Quantity Each
£36.99 £43.75 approx 15% off
Please select one of the buttons below.
5 x Seep Point Motors With Switch "Self Latching" (GMC-PM4)
< Click here for more details >
< Click here for less details >
Seep Point Motors have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-4 is a self-latching point motor, ideal for use with hand-made points, and also includes a changeover switch for operating accessories or changing frog polarity. Drive rod 41mm long.
Quantity Each
£12.49 £13.75 approx 10% off
Please select one of the buttons below.
Tension Lock Uncoupler Suitable For OO Gauge (GMC-TLU)
Quantity Each
£10.99 £12.75 approx 15% off
Please select one of the buttons below.
Electro Magnetic Uncoupler Suitable For N Gauge (GMC-EM1)
< Click here for more details >
< Click here for less details >
Converts standard coupling by fitting an EM2 adaptor on the underside of the coupling hook. Uncoupling is achieved by stopping the adaptor fitted wagon directly over the EM1. When the EM1 is energised, the steel adaptor arm is attracted downwards,making the couplings disconnect.
Quantity Each
£7.49 £8.45 approx 10% off
Please select one of the buttons below.
Classic Solenoid Point Motor (GMC-PM10)
< Click here for more details >
< Click here for less details >
This Point Motor has been created to work with the leading brands of track in the United Kingdom. Designed with easy installation in mind, it has a built inreversible mounting plate (with adjustment slots and holes), robust, plated metalwork and fibreglass PCBs for longer life.
The PM10’s magnetic coils are high efficiency for reliable operation, needing much less current than other brands. PM10 also has easy to use “solder-free” screw terminals. We have included mounting screws and a throw-bar extension.
Quantity Each
£34.49 £38.45 approx 10% off
Please select one of the buttons below.
Classic Point Motor - Pack Of 5 (GMC-BPPM10)
< Click here for more details >
< Click here for less details >
This Point Motor has been created to work with the leading brands of track in the United Kingdom. Designed with easy installation in mind, it has a built inreversible mounting plate (with adjustment slots and holes), robust, plated metalwork and fibreglass PCBs for longer life.
The PM10’s magnetic coils are high efficiency for reliable operation, needing much less current than other brands. PM10 also has easy to use “solder-free” screw terminals. We have included mounting screws and a throw-bar extension. We even supply a handy screwdriver with this 5 pack.
Quantity Each
£21.45
Please select one of the buttons below.
Classic Solenoid Point Motor - DCC Fitted (GMC-PM10D)
< Click here for more details >
< Click here for less details >
he very versatile PM10D Digital Solenoid
The PM10D point motor has been created to make installation and wiring as easy as possible for all modellers in all scales.
Based on the very efficient "Universal fit" PM10, the PM10D also incorporates a DCC-Digital decoder that makes wiring very simple.
However, DC modellers have not been forgotten - At Gaugemaster we understand that while ALL modellers want easy wiring, many who still prefer to drive their trains with DC need simple wiring too, so the PM10D has also been designed to be 100% DC compatible!
How simple is PM10D? How about fewer wires and less soldering!
Installation can be either directly to your pointwork via the sleeper tabs OR "under-board" using the in-built fixing points. We even supply you with screws and a drive-pin extension!
Basic wiring of power to your PM10D for point operation is super-easy and needs only TWO wires, not three as is usual.
PM10D has built-in connections for added "Control Panel Switches" as well as LEDs on your mimic panel for position indicators, and all terminals are "Screw connections".
Power is stored in the built-in CDU, so power wiring can be lighter (We recommend GM09RB or similar) - and LED and panel switches carry almost NO current at all, so they can bewired with GM11 (Available in various colours).
Of course, PM10D users also benefit from Gaugemaster’s well regarded customer service for back-up, support and advice.
Quantity Each
£90.99 £107.25 approx 15% off
Please select one of the buttons below.
Classic Solenoid Point Motor - DCC Fitted - Pack Of 5 (GMC-PM10D)
< Click here for more details >
< Click here for less details >
The very versatile PM10D Digital Solenoid
The PM10D point motor has been created to make installation and wiring as easy as possible for all modellers in all scales.
Based on the very efficient "Universal fit" PM10, the PM10D also incorporates a DCC-Digital decoder that makes wiring very simple.
However, DC modellers have not been forgotten - At Gaugemaster we understand that while ALL modellers want easy wiring, many who still prefer to drive their trains with DC need simple wiring too, so the PM10D has also been designed to be 100% DC compatible!
How simple is PM10D? How about fewer wires and less soldering!
Installation can be either directly to your pointwork via the sleeper tabs OR "under-board" using the in-built fixing points. We even supply you with screws and a drive-pin extension!
Basic wiring of power to your PM10D for point operation is super-easy and needs only TWO wires, not three as is usual.
PM10D has built-in connections for added "Control Panel Switches" as well as LEDs on your mimic panel for position indicators, and all terminals are "Screw connections".
Power is stored in the built-in CDU, so power wiring can be lighter (We recommend GM09RB or similar) - and LED and panel switches carry almost NO current at all, so they can bewired with GM11 (Available in various colours).
Of course, PM10D users also benefit from Gaugemaster’s well regarded customer service for back-up, support and advice.
Quantity Each
£6.50
Please select one of the buttons below.
Coupling Adaptor Fret x 20 (GMC-EM2)
Quantity Each
£37.99 £41.99 approx 10% off
Please select one of the buttons below.
Electronic Super Shuttle Unit (GMC-SS1)
< Click here for more details >
< Click here for less details >
Electronic Automatic Single Track Cleaner for use with all types of controllers. The unit superimposes a harmless high frequency signal over the output from the controller. When a poor contact between loco and rail is detected the unit switches on, ionising the gap and burning off the dirt, switching off again when contact is restored.
Input:
16v A.C. at a maximum of 1.25 amps (Gaugemaster T1 or M1 recommended)
Specification:
The HF-1 is compatible with the SS-1 , SS-2 and SS-3
Measurements:
75mm x 60mm x 27mm
Quantity Each
£3.95
Please select one of the buttons below.
Hornby Type Crimped Pin Terminals - Pack Of 6 X8011 TT8025 (GM14)
Quantity Each
£42.49 £49.95 approx 15% off
Please select one of the buttons below.
Electronic Super Shuttle Unit For G Scale (GMC-SS1LGB)
Quantity Each
£44.99 £49.95 approx 10% off
Please select one of the buttons below.
Electronic Station Stop Controller (GMC-SS2)
< Click here for more details >
< Click here for less details >
A small unit providing an automatic stop and start facility which only requires one reed switch to be installed. The locomotive decelerates for about 5 seconds after passing the reed switch and stops for approximately 20 seconds as factory set. The time stopped can be adjusted from approx 20-70 seconds, the rate of deceleration is also adjustable. Reed switch and magnet are included.
Quantity Each
£40.49 £44.95 approx 10% off
Please select one of the buttons below.
High Frequency Electronic Single Track Cleaner (GMC-HF1)
< Click here for more details >
< Click here for less details >
The 12v DC controlled output from the controller is passed through the unit. Connection between unit, power source, controller and track is achieved via six terminal connections. The unit superimposes a harmless high-frequency signal over the output from the controller. When a poor contact between locomotive and rail is detected, the unit switches on, ionising the gap and burning off the dirt, switching off again when contact is restored. Compatible with GMC-SS1 and GMC-SS2. (For A Single Track).
Quantity Each
£46.49 £54.95 approx 15% off
Please select one of the buttons below.
High Frequency Electronic Double Track Cleaner (GMC-HF2)
< Click here for more details >
< Click here for less details >
Electronic Automatic Twin Track Cleaner for use with all types of controllers. This unit works in the same way as the single track unit above, with the facility for a second track.
Input:
Measurements:
16v A.C. at a maximum of 1.25 amps (Gaugemaster T1 or M1 recommended)
109mm x 68mm x 20mm
Specification:
The HF-2 is compatible with the SS-1 , SS-2 and SS-3
Quantity Each
£11.95
Please select one of the buttons below.
Surface Mounted Point Motor (GMC-PM20)
< Click here for more details >
< Click here for less details >
Designed with easy installation in mind, PM20 is placed parallel to your point-work and operates equally well orientated either way. PM20 works well with all popular modelling scales, and with the leading brands of track in the UK.
The magnetic coils are high-efficiency for reliable operation, needing much less current than most other brands. PM20 also has a plug-in harness that is very easy to use. Mounting screws are included, and also a handy screwdriver with the bulk pack.
Fitting the PM20 is simplicity itself, because the harness is pre-terminated, and the PM20 tie-bar linkage just drops over the point 'tie-bar' pin. PM20 also has manual operation, so you can test it before fixing it down.
If you fix your points directly to the board - You can simply fix the motor directly onto the board with the screws provided after placing the link over the end of the point tie-bar.
If you use track-bed under your points - If the track bed is thin, you may be able to mount PM20 directly, but test first. Otherwise make a pad from card or similarly firm material to raise the PM20 to the correct height before mounting it.
Wiring the PM20 - This is easy, as the PM20 features a reversible 3-way plug-in connector. the included harness can be extended with GMC-PM51 Point Motor Wire and GMC-PM50 Connection Boxes.
Applying power to PM20 - This product is for low voltage use only, between 16v and 24v (AC or DC are both okay). Please use 1amp supply or greater. Ideally also use a Capacitor Discharge Unit such as the GMC-CDU or similar for optimum performance.
As with all solenoids, this motor is designed for use with passing contact switches such as the GM510 Miniature Toggle Switch. Connection to a standard On-On swich (or a permanent connection or power source) will lead to irreversible damage.
Quantity Each
£54.99 £64.75 approx 15% off
Please select one of the buttons below.
Surface Mounted Point Motor - Pack Of 5 (GMC-PM20)
< Click here for more details >
< Click here for less details >
Designed with easy installation in mind, PM20 is placed parallel to your point-work and operates equally well orientated either way. PM20 works well with all popular modelling scales, and with the leading brands of track in the UK.
The magnetic coils are high-efficiency for reliable operation, needing much less current than most other brands. PM20 also has a plug-in harness that is very easy to use. Mounting screws are included, and also a handy screwdriver with the bulk pack.
Fitting the PM20 is simplicity itself, because the harness is pre-terminated, and the PM20 tie-bar linkage just drops over the point 'tie-bar' pin. PM20 also has manual operation, so you can test it before fixing it down.
If you fix your points directly to the board - You can simply fix the motor directly onto the board with the screws provided after placing the link over the end of the point tie-bar.
If you use track-bed under your points - If the track bed is thin, you may be able to mount PM20 directly, but test first. Otherwise make a pad from card or similarly firm material to raise the PM20 to the correct height before mounting it.
Wiring the PM20 - This is easy, as the PM20 features a reversible 3-way plug-in connector. the included harness can be extended with GMC-PM51 Point Motor Wire and GMC-PM50 Connection Boxes.
Applying power to PM20 - This product is for low voltage use only, between 16v and 24v (AC or DC are both okay). Please use 1amp supply or greater. Ideally also use a Capacitor Discharge Unit such as the GMC-CDU or similar for optimum performance.
As with all solenoids, this motor is designed for use with passing contact switches such as the GM510 Miniature Toggle Switch. Connection to a standard On-On swich (or a permanent connection or power source) will lead to irreversible damage.
Quantity Each
£29.95
Please select one of the buttons below.
Surface Mounted Point Motor - DCC Fitted (GMC-PM20D)
< Click here for more details >
< Click here for less details >
Digital Surface Mounted Point Motor. This pack contains a PM20 Point Motor, a DCC Single Output Accessory Decoder, a 3 Core Link Wire, 3 Accessory Decoder Screws and 5 Point Motor Screws. There are also full instructions on installation, wiring and addressing. The back of the Accessory decoder is fitted with a self adhisive pad so it can be stuck on a board during installation.
Measurements:
Length: 68mm
Width: 22mm
Depth: 9mm
Length: 37mm
Width: 38mm
Depth: 20mm
Quantity Each
£6.25
Please select one of the buttons below.
Quantity Each
£1.00
Please select one of the buttons below.
Quantity Each
£13.99 £16.45 approx 15% off
Please select one of the buttons below.
Reed Switches x 10 & Magnets x 5 (GM99)
Quantity Each
£2.45
Please select one of the buttons below.
1 x Slide Switch DPDT (GM501)
Quantity Each
£13.99 £16.75 approx 15% off
Please select one of the buttons below.
25 x Slide Switches DPDT (BPGM501)
Quantity Each
£2.45
Please select one of the buttons below.
1 x Slide Switch DPDT Centre-Off (GM502)
Quantity Each
£13.99 £16.75 approx 15% off
Please select one of the buttons below.
25 x Slide Switches DPDT Centre-Off (BPGM502)
Quantity Each
£3.55
Please select one of the buttons below.
1 x Toggle Switch SPST (GM503)
Quantity Each
£37.99 £44.95 approx 15% off
Please select one of the buttons below.
25 x Toggle Switches SPST (BPGM503)
Quantity Each
£3.75
Please select one of the buttons below.
1 x Toggle Switch DPDT (GM504)
Quantity Each
£46.49 £54.95 approx 15% off
Please select one of the buttons below.
25 x Toggle Switches DPDT (BPGM504)
Quantity Each
£4.65
Please select one of the buttons below.
1 x Mini-Toggle Switch DPDT Centre-Off (GM505)
Quantity Each
£43.99 £54.95 approx 20% off
Please select one of the buttons below.
25 x Mini-Toggle Switches DPDT Centre-Off (BPGM505)
Quantity Each
£1.99
Please select one of the buttons below.
1 x Mini-Toggle Switch DPDT Sprung Centre-Off (GM505A)
Quantity Each
£3.95
Please select one of the buttons below.
1 x Mini-Toggle Switch DPDT (GM506)
Quantity Each
£46.49 £54.95 approx 15% off
Please select one of the buttons below.
25 x Mini-Toggle Switches DPDT (BPGM506)
Quantity Each
£3.45
Please select one of the buttons below.
1 x Mini-Toggle Switch SPST (GM507)
Quantity Each
£37.99 £44.95 approx 15% off
Please select one of the buttons below.
25 x Mini-Toggle Switches SPST (BPGM507)
Quantity Each
£3.45
Please select one of the buttons below.
1 x Mini-Toggle Switch SPDT (GM508)
Quantity Each
£37.99 £44.95 approx 15% off
Please select one of the buttons below.
25 x Mini-Toggle Switches SPDT (BPGM508)
Quantity Each
£3.45
Please select one of the buttons below.
1 x Mini-Toggle Switch SPDT Centre-Off (GM509)
Quantity Each
£42.49 £49.95 approx 15% off
Please select one of the buttons below.
25 x Mini-Toggle Switches SPDT Centre-Off (BPGM509)
Quantity Each
£3.75
Please select one of the buttons below.
1 x Mini-Toggle Switch For Point Motors SPDT Sprung Centre-Off (GM510)
Quantity Each
£46.49 £54.95 approx 15% off
Please select one of the buttons below.
25 x Mini-Toggle Switches For Point Motors SPDT Sprung Centre-Off (BPGM510)
Quantity Each
£5.25
Please select one of the buttons below.
SPDT Momentary Contact Toggle Switch G Scale Point Motors (GM511)
Quantity Each
£7.95
Please select one of the buttons below.
5 x Push To Break Switch "Black" (GM512)
Quantity Each
£4.25
Please select one of the buttons below.
5 x Push To Make Switch "Black" (GM513)
Quantity Each
£9.99 £11.95 approx 15% off
Please select one of the buttons below.
25 x Push To Make Switch "Black" (GM513)
Quantity Each
£4.25
Please select one of the buttons below.
5 x Push To Make Switches "Blue" (GM514)
Quantity Each
£9.99 £11.95 approx 15% off
Please select one of the buttons below.
25 x Push To Make Switches "Blue" (GM514)
Quantity Each
£4.25
Please select one of the buttons below.
5 x Push To Make Switches "Green" (GM515)
Quantity Each
£9.99 £11.95 approx 15% off
Please select one of the buttons below.
25 x Push To Make Switches "Green" (GM515)
Quantity Each
£4.25
Please select one of the buttons below.
5 x Push To Make Switches "Red" (GM516)
Quantity Each
£9.99 £11.95 approx 15% off
Please select one of the buttons below.
25 x Push To Make Switches "Red" (GM516)
Quantity Each
£4.25
Please select one of the buttons below.
5 x Push To Make Switches "White" (GM517)
Quantity Each
£9.99 £11.95 approx 15% off
Please select one of the buttons below.
25 x Push To Make Switches "White" (GM517)
Quantity Each
£4.25
Please select one of the buttons below.
5 x Push To Make Switches "Yellow" (GM518)
Quantity Each
£9.99 £11.95 approx 15% off
Please select one of the buttons below.
25 x Push To Make Switches "Yellow" (GM518)
Quantity Each
£4.25
Please select one of the buttons below.
A7 Rotary Switch 1 Pole 12 Way (GM519)
Quantity Each
£5.50
Please select one of the buttons below.
A8 Rotary Switch 2 Pole 6 Way (GM520)
Quantity Each
£5.50
Please select one of the buttons below.
A9 Rotary Switch 3 Pole 4 Way (GM521)
< Click here for more details >
< Click here for less details >
3 Pole 4 Way switch, this switch can control a three wire input and give you the option to activate up to 4 outputs. It also give you the option to use three single wire inputs and switch all three at the same time. Can be used for isolating sections on the layout or controlling signals
Quantity Each
£5.50
Please select one of the buttons below.
A10 Rotary Switch 4 Pole 3 Way (GM522)
< Click here for more details >
< Click here for less details >
4 Pole 3 Way switch, this switch can control a three wire input and give you the option to activate up to 3 outputs. It also give you the option to use four single wire inputs and switch all four at the same time. Can be used for isolating sections on the layout or controlling signals.