Quantity Each
£18.99
Please select one of the buttons below.
Digital Controller Pack (C7002)
< Click here for more details >
< Click here for less details >
Age Suitability: 7+
Battery Requirements: None
This hand controller is suitable for use with Scalextric Digital Powerbases. Not suitable for use with standard Scalextric or older analogue power bases.
Contents
1 x Hand Controller
8 x Alternate Coloured Tops (Blue, Purple, Red, Orange, Yellow, Green, Black and White)
Quantity Each
£24.99
Please select one of the buttons below.
Digital Power Pack for use with Early Six Car Power Base (C7004)
Quantity Each
£20.99
Please select one of the buttons below.
Digital Board To Digitalise Scalextric Plug Cars "Solder In Type" (C7005)
Quantity Each
£56.49 £62.97 approx 10% off
Please select one of the buttons below.
Digital Board To Digitalise Scalextric Plug Cars "Solder In Type" - Pack Of 3 (C7005)
Quantity Each
£44.99 £49.99 approx 10% off
Please select one of the buttons below.
Digital Audi TT (Red) & Digital Controller Pack (C7012)
Quantity Each
£44.99 £49.99 approx 10% off
Please select one of the buttons below.
Digital Audi TT (Blue) & Digital Controller Pack (C7013)
£49.99
Please select one of the buttons below.
Digital Audi TT (Blue/Grey) & Digital Controller Pack (C7013) Believed to be last one available to order.
Quantity Each
£20.99
Please select one of the buttons below.
Digital Plug to digitalise Scalextric Plug Cars "DPR" (C8515)
< Click here for more details >
< Click here for less details >
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the EasyFit Digital Plug to the chassis. Features the EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8515 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006. * Four car and six car powerbases available Please note: Once fitted there may be issues running on an analogue track layout, however this digital chip is easy to remove from the car and once removed will work on an analogue track layout.
Quantity Each
£56.49 £62.97 approx 10% off
Please select one of the buttons below.
Digital Plug To Digitalise Scalextric Plug Cars "DPR" - Pack Of 3 (C8515)
< Click here for more details >
< Click here for less details >
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the EasyFit Digital Plug to the chassis. Features the EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8515 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005. * Four car and six car powerbases available Please note: Once fitted there may be issues running on an analogue track layout, however this digital chip is easy to remove from the car and once removed will work on an analogue track layout.
Quantity Each
£100.99 £125.94 approx 20% off
Please select one of the buttons below.
Digital Plug To Digitalise Scalextric Plug Cars "DPR" - Pack Of 6 (C8515)
< Click here for more details >
< Click here for less details >
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the EasyFit Digital Plug to the chassis. Features the EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8515 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005. * Four car and six car powerbases available Please note: Once fitted there may be issues running on an analogue track layout, however this digital chip is easy to remove from the car and once removed will work on an analogue track layout.
£23.99
Please select one of the buttons below.
Digital Plug To Digitalise Scalextric Plug Cars "DPR" With Brake Lights & Continuous Lights (C8515M) Believed to be last one available to order.
< Click here for more details >
< Click here for less details >
A C8515 digital chip already modified for brake lights & continuous lights
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the EasyFit Digital Plug to the chassis. Features the EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8515 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005. * Four car and six car powerbases available Please note: Once fitted there may be issues running on an analogue track layout, however this digital chip is easy to remove from the car and once removed will work on an analogue track layout.
Quantity Each
£0.50
Please select one of the buttons below.
Brake Lights & Continuous Light Harness "1.5mm Pitch" (C8515H)
Quantity Each
£20.99
Please select one of the buttons below.
Digital Plug To Digitalise Scalextric Plug Cars "DPR" (C8516)
< Click here for more details >
< Click here for less details >
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the F1 EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis. Features The F1 EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005. * Four car and six car powerbases available.
Quantity Each
£56.49 £62.97 approx 10% off
Please select one of the buttons below.
Digital Plug To Digitalise Scalextric Plug Cars "DPR" - Pack Of 3 (C8516)
< Click here for more details >
< Click here for less details >
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the F1 EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis. Features The F1 EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005. * Four car and six car powerbases available.
Quantity Each
£100.99 £125.94 approx 20% off
Please select one of the buttons below.
Digital Plug To Digitalise Scalextric Plug Cars "DPR" - Pack Of 6 (C8516)
< Click here for more details >
< Click here for less details >
Scalextric Digital represents a ground-breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! Most cars produced from 2007 onwards will have, as standard, a socket on the car where the F1 EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to convert a DPR car. 1: Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2: Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug. 3: Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis. Features The F1 EasyFit Digital Plug offers include: a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Please note: the C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005. * Four car and six car powerbases available.